Application

By eliminating costly clamps and fixtures, Two-Pole Cylindrical Insulated Magnet Assemblies (2P Series) provide an economical solution to many material handling applications involving ferrous products. These magnets can improve productivity in applications that include part feeding, automatic part transfers, welding and holding parts in metal forming operations. All MPI Cylindrical Insulated Magnet Assemblies are supplied standard with precision-ground flat, extended mild steel poles, which can be machined to custom fit irregular shapes. These magnets are not affected by vibration or temperatures up to 180° F and are fully insulated for direct mounting to steel surfaces.

Construction:

Powerful Ceramic Permanent Magnet material produces a high concentration of magnet energy in the mild steel poles contact surfaces. A nonferrous aluminum cup, potted with high-impact epoxy, provides both physical durability and insulation against demagnetization. Actual loss of 1/2 of 1% over 100 years can be expected, under normal conditions.

Caution:

Care must be used not to drill, tap or change the magnet assemblies without risk of reducing the holding values as shown in the following chart.

2-Pole Magnets – Series: 2P Selection Guide
Part No.	Dia. “A”	Length “B”	Holding Value Lbs.
2P-3750	0.375	0.5	1
2P-3762		0.625	1.5
2P-3775		0.75	1.75
2P-3787		0.875	2
2P-3710		1	2.25
2P-5050	0.5	0.5	2.25
2P-5062		0.625	2.5
2P-5075		0.75	3
2P-5087		0.875	3.5
2P-5010		1	3.75
2P-6250	0.625	0.5	3.5
2P-6262		0.625	3.75
2P-6275		0.75	4
2P-6287		0.875	4.5
2P-6210		1	5
2P-7550	0.75	0.5	5
2P-7562		0.625	7
2P-7575		0.75	8
2P-7587		0.875	8.5
2P-7510		1	9.5
2P-7511		1.125	10
2P-7512		1.25	10.5
2P-8750	0.875	0.5	5.25
2P-8762		0.625	7.5
2P-8775		0.75	9
2P-8787		0.875	10
2P-8710		1	11
2P-8711		1.125	12
2P-8712		1.25	14
2P-8715		1.5	15
2P-1050	1	0.5	7
2P-1062		0.625	8
2P-1075		0.75	9
2P-1087		0.875	10
2P-1010		1	12
2P-1011		1.125	14
2P-1012		1.25	16
2P-1015		1.5	17
2P-1150	1.125	0.5	9
2P-1162		0.625	10
2P-1175		0.75	11
2P-1187		0.875	12
2P-1110		1	14
2P-1111		1.125	17
2P-1112		1.25	18
2P-1115		1.5	20
2P-1250	1.25	0.5	8
2P-1262		0.625	11
2P-1275		0.75	13
2P-1287		0.875	18
2P-1210		1	20
2P-1211		1.125	23
2P-1212		1.25	24
2P-1215		1.5	26

Specifications subject to change.