|
Magnetic Separators - Type AMPI's type 'A' magnetic separators utilize a number of closely spaced north and south magnetic "poles" to create a powerful magnetic field to capture and retain small to medium sized tramp metal contaminants. Type 'A' magnet circuits are ideally suited for applications such as final inspection of high quality consumer food products. Type 'A' magnets are available in a wide range of models, each in many standard sizes to meet specific magnetic application and budget requirements. 
PTK - PULL TEST KITMPI offers a key tool to assist in implementing and maintaining an effective magnetic separation equipment Quality Control program. This tool is known as the MPI Pull Test Kit (PTK) and is designed for in-plant use to inspect and document the performance of existing magnetic separators. PTKs are ideal for companies committed to quality HACCP, TQM, GMP or other similar programs. 
DRAWER & HOUSINGMPI’s Drawer & Housings offer a pre-engineered design solution to improve operator access on manual clean models or complete automation on self clean models. These features reduce or eliminate costly labor hours required to maintain maximum magnet performance. The pre-engineered designs also improve plant area housekeeping and minimize product loss during cleaning through the use of robust and reliably designed Housing seals and component mechanisms. DMQC Drawer magnet Quick Clean DMAQC Drawer Magnet Self Aligning Quick clean DMASC Drawer Magnet Self Aligning Self Clean DMUQC Drawer Magnet & Housing Quick Clean DMUSC Drawer Magnet & Housing Self Clean CFDMUQC Continuous Flow Drawer Magnet & Housing Quick Clean CFDMUSC Continuous Flow Drawer Magnet & Housing Self Clean CDM/SDM Carbon Steel/Stainless Steel Drawer Magnet CDMLP/SDMLP Carbon Steel/Stainless Steel Drawer Magnet Low Profile 
PNEUMATIC LINE MAGNETMPI’s Pneumatic Line Magnets are designed exclusively for use in Dilute-Phase pneumatic conveying systems. Typical applications include powder or granular food products, pharmaceuticals, plastics and chemicals that are conveyed in these, high-speed low density-to-air volume systems. As product is conveyed in the line, it is diverted around the magnet’s nose cone and past the alternating north and south magnetic poles. The tramp metals are captured on and collect behind the sanitary welded, ribbed magnetic poles to minimize tramp metal "wash-off." 
ALL MAGNETIC GRATEMPI’s All Magnetic Grate is designed to offer a 100% magnetic coverage Grate Magnet design. The Grate Magnet’s frame element(s) is magnetically charged to provide a powerful magnetic surface to collect tramp metal and also magnetically charges the Grate Magnet’s diverters. The diverters are made from 400 grade stainless steel, allowing them to become magnetized so they can also capture tramp metal. This magnet product is commonly found in choke fed gravity hopper systems, such as plastics injection molding machines. 
GRATE & TUBE MAGNETSMPI’s Grate and Tube Magnets provide effective magnetic protection in a wide variety of free flowing, vertical, gravity product streams. They are easy to install and are an economical solution to protect processing equipment and improve or maintain product quality standards. As tramp metals are captured, they are washed around to the magnet’s underside where it is hidden from oncoming product flow, eliminating tramp metal "wash-off." ROTO GRATEMPI’s magnetic Roto Grates are designed to offer a magnetic solution for difficult flowing products that typically bridge and choke in conventional magnetic Grate or Drawer & Housing applications. These magnets can capture many of the same tramp metal contaminants successfully removed from process streams by magnetic Grates or Drawer & Housing models however tramp metal "wash-off" can be a factor when using this model type ‘A’ magnetic separator. 
LIQUID FINGER TRAPMPI’s Liquid Trap Magnets are designed to remove metal contaminants from food grade quality, sanitary application liquid process flow lines. The magnetic Tubes or "fingers" protrude from the housing top, down into the process flow area. As product is pumped past the magnetic tubes, metal contaminants are captured and collected. Process line size, pressure and product viscosity are three key factors when considering this model magnetic separator. 
COOLANT CLEANERMPI’s line of magnetic Coolant Cleaners provide continuous cleaning and removal of large volume tramp iron typically found in metal grinding, milling, turning and broaching machines. The magnet slowly rotates while partially submerged in the machine pump coolant reservoir tank. As coolant is pumped into the tank, the magnet attracts and removes the tramp metals from the coolant where it is carried to the top of the magnet, out of the tank. A wiper blade scrapes collected tramp metals off of the magnet into a collection area for final processing. 
INLINE FILTER MAGNETMPI’s Inline Filter Magnets offer an industrial application class liquid flow magnetic separation option. This model’s economical design is ideally suited for applications such as EDM wire machine pump reservoirs, hydraulic press lines or other low pressure industrial product process lines. |
|
