- No consumables required, ever! Once purchased, the unit does not require ongoing spend, resulting in lower operating costs
- Reduced environmental impact, all you are left with is metallic material – no need to dispose of dirty cartridges!
- No more paper filters
- Contributes toward less trash in landfills
- Lengthens coolant life; huge cost reduction on coolant disposal, replacement
Eco-Mag® is easily integrated into shop fluid lines. Fluids are pumped through the Eco-Mag®, which integrates magnetic technology, to separate steel turnings, chips and/or swarf from the fluid flow. As the fluid flows over the magnetic material ferrous swarf is attracted to and secured by the magnet. Using the supplied cleaning tool, a fully contaminated core can be cleaned in less than 30 seconds, leaving you with only metallic particles, which can be easily disposed of.
Eco-Mag Magnetic Filter Part # | Length (IN) | Diam. (IN) | Connection NPT (IN) | Weight (LBS) | Max. Pressure (PSI) | Max. Flow Rate (Gal/Minute) |
Max. Temp (F) |
ECO5/1.00 | 7.36 | 3.77 | 1 | 5.5 | 174 | 18 | 122 |
ECO10/1.0 | 12.36 | 3.54 | 1 | 11.0 | 174 | 26 | 122 |
ECO20/1.5 | 23.78 | 3.15 | 1.5 | 18.7 | 174 | 39 | 122 |
Using the supplied cleaning tool, a fully contaminated core can be cleaned in under 30 seconds, leaving you with only metallic particles, which can be easily disposed of, no dirty cartridges.
- Accessories include:
- Wrench to open bowl
- Viton O-ring
- Core cleaning post
- Adapters