Hi-Q X-ray systems inspect for a full range of possible contaminants including metallic, and non-metallic (glass, ceramic, stone, bone, rubber, plastic etc.). Hi-Q X-ray can inspect metallic and non-metallic packaging and canned goods. Inspection is not effected by temperature, humidity, salt content or any other product effects.
X-ray inspection is sorting based on product density. An x-ray inspection machine takes an image that is pixel based. The machine compares pixel density to stored pictures of “good” product to detect defects and contaminants. If the density of a product falls outside of acceptable range the reject mechanism removes the contaminated product out of the product flow.
- For products in jars and cans.
- Applies dual image views to achieve optimal inspection and avoid missing blind areas.
- Intelligent zoning to ensure optimal sensitivity for different areas.
- Multi-function to achieve the synchronized inspection of foreign bodies, caps, fill level and packaging defects.
|Model||Dual Beam X-Ray Inspection|
|X-Ray Tube||Single tube max. 80Kv, 210W|
|Max. Inspection Width||200mm|
|Max. Inspection Height||250mm|
|Detection Ability||SUS Ball 0.4mm, SUS Wire 0.3*2mm|
|Operating Environment||Temp: -10 -40∞ C; Cooling Method: Industrial air conditioner
Humidity: 30-90%, Non-condensing; Humidity control: dehumidifier
|X-Ray Emission||< 1 microsievert per hour|
|Power Supply||AC220V, 1.5Kva Max. 50/60Hz|
|Levels of Protection||IP66|
|Main Material||Stainless steel (SUS304)|