Eddy Current

MPI’s proven Eddy Current technology ensures higher separation rates. State-of-the-ar more

Related Resources

  • Maximum Strength
    • Non-conductive, corrosion-resistant drum shelf
    • The ultra-high-strength magnetic rotor provides maximum efficiency
    • High throughput for high yield
    • The highest grade of permanent Rare Earth magnet material ensures maximum field strength — magnets will not demagnetize
    • A large motor spins magnetic rotor at high speeds
    • Fixed rotor motor speed allows optimum separation
    • High sorting accuracy
    • Fixed speed motor produces 200 FPM belt speed
  • Easy Operation
    • Balanced magnetic rotor and drive for trouble-free operation
    • Control unit integrated onto machinery
    • “V” groove tracking with flexible sidewalls for accurate belt tracking
    • Easy-to-operate control panel with the main circuit switch
    • “Start-stop” pushbuttons, emergency stop button and indicator lights. NEMA 4 enclosure
    • Access doors for easy inspection and maintenance
    • UHMW side edge keeps burden material confined to belt
  • Maximum Durability
    • Oversized rotor bearings
    • Tough urethane belt
    • Thermo-welded cleats move burden efficiently, reducing belt wear
    • Control panel with soft start
    • Programmable breaking with AC inverter
    • Composite shell coated in corrosion-resistant material

Commingled material is fed onto the conveyor belt of the eddy current separator. The material is conveyed over a spinning magnetic rotor where separation occurs. The two streams of material discharge over and away from the separator. The main component of MPI’s Eddy Current Separator (ECS Series) is the magnetic rotor which uses a series of permanent Rare Earth magnets mounted to a plate which, in turn, are attached to the motor driven shaft. These magnets are covered by a fiberglass shell with ceramic tiles that reduce wear and allow the conveyor belt to ride over them. The magnetic rotor spins independently and at a much faster rate than the conveyor belt pulley. When product such as aluminum passes over the shell, the spinning magnets inside the shell generate an eddy current in the aluminum, thus, creating a magnetic field around the piece of aluminum. The polarity of the magnetic field of the aluminum is the same as the rotating magnets, which causes 1) the aluminum to be repelled away from the separator beyond the product flow trajectory and 2) separation of the aluminum from the rest of the product being conveyed. Product such as plastic, glass or other process materials simply fall off the end of the separator.


Eddy Current Model # Approximate Capacity Usable Belt Width Approximate Overall Width Drive Motor Horse Power Rotor Motor Horse Power Rotor Motor Diameter*
ECS-20 4 Tons/Hr 20″ 78″ 1.5 5 12″
ECS-30 6 Tons/Hr 30″ 89″ 2 7.5 12″
ECS-40 8 Tons/Hr 40″ 99″ 3 10 12″
ECX-20 4 Tons/Hr 20″ 78″ 1.5 5 16″
ECX-30 6 Tons/Hr 30″ 89″ 2 7.5 16″
ECX-40 8 Tons/Hr 40″ 99″ 3 10 16″